882 Sbc Heads Specs - game-server-msp5i
The heads are casting 882.
They are light head castings and are prone to cracking.
Before the advent of the sportsman ii heads.
I did the math on pat kelleys calculator and i came up with 9. 2:1 with these heads and 10. 4:1 with 64cc heads that i planned on using.
Now, we blueprinted the heads to 63. 3cc chamber size, and with all.
I assume that the 882 refers to the serial number.
I'm getting ready to rebuild my 400 sbc and am on a tight budget.
I’m thinking about going with a nkg heat range of 5.
They were produced in the millions and if you are rebuilding a 70's era 350,.
Just as a comparison it went much harder than an identical 350 running the more common 882 heads.
I’m thinking about going with a nkg heat range of 5.
They were produced in the millions and if you are rebuilding a 70's era 350,.
Just as a comparison it went much harder than an identical 350 running the more common 882 heads.
For instance 333882, 3238882, etc.
All i had done to the head was have them cleaned up, new valve guides installed and install the new springs for the cam.
I’ve got some 1974 882 to heads on my 383.
This head was tested with the 1. 94/1. 50 valves.
882 heads are not as bad as some say, i have 390hp out of the motor in kims wagon.
Anyone know what the spark plug reach spec is for this head?
The 993 is a 'heavy' casting 76cc chamber head that is actually not bad for performance work.
I`m going to see if the machine shop can.
The heads have a tendency to crack, and are factory with 1. 940 intake valves and 1. 500 exhaust valves.
🔗 Related Articles You Might Like:
Heart-Pounding NFL Draft Rankings By Position: Whos The Next Franchise Savior? The Future Of Work: Part-Time Work From Home Jobs That Can Change Your Life The Most Comprehensive Rikers Inmate Search Engine: Your Guide To Finding InmatesI’ve got some 1974 882 to heads on my 383.
This head was tested with the 1. 94/1. 50 valves.
882 heads are not as bad as some say, i have 390hp out of the motor in kims wagon.
Anyone know what the spark plug reach spec is for this head?
The 993 is a 'heavy' casting 76cc chamber head that is actually not bad for performance work.
I`m going to see if the machine shop can.
The heads have a tendency to crack, and are factory with 1. 940 intake valves and 1. 500 exhaust valves.
I was wondering if these heads would be decent or if they are junk?
76cc 1. 94/1. 50.
The easiest way to check if yours is.
Best i can find is a fairly consistent >200cfm rating.
The vortecs not only out flow the '882 head below 0. 400 valve lift but that smaller combustion chamber is heart shaped not wedge shaped which improves the mixture swirl to.
Depending on the cam, intake, pistons, and headers you run, you might.
It has the original 882 heads on it.
The 882 head is the most produced chevy cylinder head over and above all other casting numbers.
In the garage is a well used 350 wearing some heads with casting 993.
📸 Image Gallery
The 993 is a 'heavy' casting 76cc chamber head that is actually not bad for performance work.
I`m going to see if the machine shop can.
The heads have a tendency to crack, and are factory with 1. 940 intake valves and 1. 500 exhaust valves.
I was wondering if these heads would be decent or if they are junk?
76cc 1. 94/1. 50.
The easiest way to check if yours is.
Best i can find is a fairly consistent >200cfm rating.
The vortecs not only out flow the '882 head below 0. 400 valve lift but that smaller combustion chamber is heart shaped not wedge shaped which improves the mixture swirl to.
Depending on the cam, intake, pistons, and headers you run, you might.
It has the original 882 heads on it.
The 882 head is the most produced chevy cylinder head over and above all other casting numbers.
In the garage is a well used 350 wearing some heads with casting 993.
I have read several articles recently where folks are talking about 882 heads as if they were really the cream of the crop.
76cc 1. 94/1. 50.
The easiest way to check if yours is.
Best i can find is a fairly consistent >200cfm rating.
The vortecs not only out flow the '882 head below 0. 400 valve lift but that smaller combustion chamber is heart shaped not wedge shaped which improves the mixture swirl to.
Depending on the cam, intake, pistons, and headers you run, you might.
It has the original 882 heads on it.
The 882 head is the most produced chevy cylinder head over and above all other casting numbers.
In the garage is a well used 350 wearing some heads with casting 993.
I have read several articles recently where folks are talking about 882 heads as if they were really the cream of the crop.
📖 Continue Reading:
Transform Your Home On A Budget: Discover Hidden Gems On Facebook Marketplace Emporia, KS Experience The Simplicity Of Auto Loan Management: The Key To Success With Td Auto Finance Log InIt has the original 882 heads on it.
The 882 head is the most produced chevy cylinder head over and above all other casting numbers.
In the garage is a well used 350 wearing some heads with casting 993.
I have read several articles recently where folks are talking about 882 heads as if they were really the cream of the crop.
